Slow

class ryu.lib.packet.slow.lacp(version=1, actor_system_priority=0, actor_system='00:00:00:00:00:00', actor_key=0, actor_port_priority=0, actor_port=0, actor_state_activity=0, actor_state_timeout=0, actor_state_aggregation=0, actor_state_synchronization=0, actor_state_collecting=0, actor_state_distributing=0, actor_state_defaulted=0, actor_state_expired=0, partner_system_priority=0, partner_system='00:00:00:00:00:00', partner_key=0, partner_port_priority=0, partner_port=0, partner_state_activity=0, partner_state_timeout=0, partner_state_aggregation=0, partner_state_synchronization=0, partner_state_collecting=0, partner_state_distributing=0, partner_state_defaulted=0, partner_state_expired=0, collector_max_delay=0)

Link Aggregation Control Protocol(LACP, IEEE 802.1AX) header encoder/decoder class.

http://standards.ieee.org/getieee802/download/802.1AX-2008.pdf

LACPDU format

LACPDU structure		Octets
Subtype = LACP		1
Version Number		1
TLV Actor	TLV_type = Actor Information	1
	Actor_Information_Length = 20	1
	Actor_System_Priority	2
	Actor_System	6
	Actor_Key	2
	Actor_Port_Priority	2
	Actor_Port	2
	Actor_State	1
	Reserved	3
TLV Partner	TLV_type = Partner Information	1
	Partner_Information_Length = 20	1
	Partner_System_Priority	2
	Partner_System	6
	Partner_Key	2
	Partner_Port_Priority	2
	Partner_Port	2
	Partner_State	1
	Reserved	3
TLV Collector	TLV_type = Collector Information	1
	Collector_Information_Length = 16	1
	Collector_Max_Delay	2
	Reserved	12
TLV Terminator	TLV_type = Terminator	1
	Terminator_Length = 0	1
	Reserved	50

Terminator information uses a length value of 0 (0x00).

Note

The use of a Terminator_Length of 0 is intentional. In TLV encoding schemes it is common practice for the terminator encoding to be 0 both for the type and the length.

Actor_State and Partner_State encoded as individual bits within a single octet as follows:

7	6	5	4	3	2	1	0
EXPR	DFLT	DIST	CLCT	SYNC	AGGR	TMO	ACT

Bit	Status	Description
0	ACT	About the activity control value with regard to this link.
1	TMO	About the timeout control value with regard to this link.
2	AGGR	About how the system regards this link from the point of view of the aggregation.
3	SYNC	About how the system regards this link from the point of view of the synchronization.
4	CLCT	About collecting of incoming frames.
5	DIST	About distributing of outgoing frames.
6	DFLT	About the opposite system information which the system use.
7	EXPR	About the expire state of the system.

An instance has the following attributes at least. Most of them are same to the on-wire counterparts but in host byte order. __init__ takes the corresponding args in this order.

Attribute	Description
version	LACP version. This parameter must be set to LACP_VERSION_NUMBER(i.e. 1).
actor_system_priority	The priority assigned to this System.
actor_system	The Actor's System ID, encoded as a MAC address.
actor_key	The operational Key value assigned to the port by the Actor.
actor_port_priority	The priority assigned to this port.
actor_port	The port number assigned to the port by the Actor.
actor_state_activity	about the activity control value with regard to this link. LACP_STATE_ACTIVE(1) LACP_STATE_PASSIVE(0)
actor_state_timeout	about the timeout control value with regard to this link. LACP_STATE_SHORT_TIMEOUT(1) LACP_STATE_LONG_TIMEOUT(0)
actor_state_aggregation	about how the system regards this link from the point of view of the aggregation. LACP_STATE_AGGREGATEABLE(1) LACP_STATE_INDIVIDUAL(0)
actor_state_synchronization	about how the system regards this link from the point of view of the synchronization. LACP_STATE_IN_SYNC(1) LACP_STATE_OUT_OF_SYNC(0)
actor_state_collecting	about collecting of incoming frames. LACP_STATE_COLLECTING_ENABLED(1) LACP_STATE_COLLECTING_DISABLED(0)
actor_state_distributing	about distributing of outgoing frames. LACP_STATE_DISTRIBUTING_ENABLED(1) LACP_STATE_DISTRIBUTING_DISABLED(0)
actor_state_defaulted	about the Partner information which the the Actor use. LACP_STATE_DEFAULTED_PARTNER(1) LACP_STATE_OPERATIONAL_PARTNER(0)
actor_state_expired	about the state of the Actor. LACP_STATE_EXPIRED(1) LACP_STATE_NOT_EXPIRED(0)
partner_system_priority	The priority assigned to the Partner System.
partner_system	The Partner's System ID, encoded as a MAC address.
partner_key	The operational Key value assigned to the port by the Partner.
partner_port_priority	The priority assigned to this port by the Partner.
partner_port	The port number assigned to the port by the Partner.
partner_state_activity	See actor_state_activity.
partner_state_timeout	See actor_state_timeout.
partner_state_aggregation	See actor_state_aggregation.
partner_state_synchronization	See actor_state_synchronization.
partner_state_collecting	See actor_state_collecting.
partner_state_distributing	See actor_state_distributing.
partner_state_defaulted	See actor_state_defaulted.
partner_state_expired	See actor_state_expired.
collector_max_delay	the maximum time that the Frame Collector may delay.

class ryu.lib.packet.slow.slow

Slow Protocol header decoder class. This class has only the parser method.

http://standards.ieee.org/getieee802/download/802.3-2012_section5.pdf

Slow Protocols Subtypes

Subtype Value	Protocol Name
0	Unused - Illegal Value
1	Link Aggregation Control Protocol(LACP)
2	Link Aggregation - Marker Protocol
3	Operations, Administration, and Maintenance(OAM)
4 - 9	Reserved for future use
10	Organization Specific Slow Protocol(OSSP)
11 - 255	Unused - Illegal values